The best quality OEM exhaust products for Audi and Volkswagen are available at ECS Tuning Stop. A wide category of products such as the exhaust support bracket, gasket, hanger, locking nuts, etc., are available for sale at the ECS website www.ecstuning.com. Apart from the major components displayed in the ECS website, all other minor components are available at their department site. ECS ensures a cheaper deal online than going through their dealers.

OE Type Sleeve With Dual Clamps

A wide range of OE Type Sleeve With Dual Clamps that are used between Cat pipes and center muffler are available at ECS Tuning. Check the size of the pipe appropriate for each clamp for allowing a perfect fitting.

• Clamp range 46-51mm, to be used with a 48-49 mm pipe.
• Clamp range 47-51mm, to be used with a 55 mm pipe
• Clamp range 60mm, to be used with a 60 mm pipe

Gaskets on offer

The following gasket types are available at ECS online store under the category, Exhaust OEM.

• OE Exhaust Manifold Gasket- This is ideally used while installing a big turbo kit. The company offers a cheap insurance for any exhaust leakage caused due to this gasket.
• OE Turbo-to-Downpipe Gasket -Better Gasket for transverse KO3 and KO4’s Turbo/ Downpipe gasket. The company insists that the gasket be replaced whenever the downpipe is removed.

Exhaust Hanger

These are rubber hangers to be used in the front of rear muffler. The product comes along with the bracket.

Exhaust Manifold Copper Locking Nut

With a size 8mmX1.25, these non-flanged copper-locking nuts come from the famous Febi in Germany.

ECS Downpipe Hardware Kit

This kit consists of a set of hardware and a gasket that is to be used between turbo and downpipe. The hardware set includes OEM Studs (4) for turbocharge, OEM Nuts (4) for downpipe, and OEM HD washers (4) for downpipe.

OEM Hot Bolt Paste-170g

When applied on the roof of the thread and the contact area of the bolt head, this paste loosens the hot bolts.

Exhaust Manifold Studs

At ECS, these studs are available in ranges 8×38, 8×30, 8×35, etc. These studs are used to mount the exhaust manifold to cylinder head.

OEM Exhaust Manifold Flange Locking Nut

This locking and flanged nut comes with a size 8mm X 1.25

OEM Washer, Exhaust Manifold

This is used between manifold & nuts

OEM TDI Center Pipe

TDI center pipe comes without a center resonator. This TDI pipe can easily replace the factory pipes that come with center resonator. With the special design, it offers better sound quality and performance of the engine.

Center Exhaust Support Bracket

A pair of these rubber brackets is required to hold the center pipe

Apart from these OEM parts, ECS owns a collection of universal exhaust products. Look at the following in their website under the category, Exhaust – Universal.

• Catalytic converter – three variants with inlet/ outlet 2.25”, 2.5” and 3.0”. All of these have14″ length of converter itself, 6″ width & 4″ height
• Universal Flex Section – Available in configurations 2″X 4″, 2.25″X 4″, 2.5″X 4″, 3″X 6″. The section has welded necks that can be cut off if not required.

With the above and a variety of other branded products on display, ECS Tuning offers a satisfactory shopping experience to the customers.

Exhaust systems have undergone changes in line with the customer demands and invention of newer technologies. We have lined up a number of exhaust systems from Megan Racing. For more product details, log on to http://www.prostreetonline.com/store/exhaust/megan_racing_exhaust/


Megan Racing Axle Back Exhaust

The main features of the Megan Racing Axle Back Exhaust include perfect fitment, nice and strong deep tone, and faster response and gain performance. This new exhaust system will alter your thinking on the existing exhaust system. The axle is one of the main components of any exhaust system and the axle of Mega Racing Axle Back Exhaust is lighter and is built by high strength T-304. There is no need for welding, but you need tools for you to work yourself. The Axle Back has still the look of factory exhaust with a race style. You will not be let down because the manufacturers ensured 100% SUS 304 stainless steel with silver chrome finish and this is one of the main products of Megan Racing.

Megan Racing Drift Spec Exhaust

Having designed for an aggressive look with a noticeable sound, the Cat-Back system is constructed by SUS-304 stainless steel. CNC machined flanges and mandrel bends will be a value addition for the fully polished surface. The size of the piping for certain forced induction models is 2.5” piping and 3” piping. In order to achieve maximum performance by increasing the scavenging effect, the exhaust system is finished with a tip. The improved horsepower, deep and strong tone will be loved by any motorist. The manufacturer is offering a 12-month warranty for each Cat-Back. Besides it comes with one gasket, bolts, and nuts.

Megan Racing Resonated Test pipe

This is meant for people who look for high-flow performance but still adhere to the traffic regulations. In addition to the special designs, quality polished chrome finish is guaranteed as Megan Racing Resonated Test pipe is made by stainless steel. Megan Racing Resonators and Test Pipes offer substantial horsepower. Stainless steel is used for the production of The Megan Racing Universal Resonators as well, and both the products are easy to install.

Megan Racing Turbo Spec Exhaust

Coming with a warranty and gaskets, durability, straight through design, polished finish and smooth bends are the main characteristics of Megan Racing Cat-Back Systems. It is made by 100% T-304 stainless steel. For superior performance and aggressive tone in line with the traffic law, it has built-in resonator and dual-chamber silencer. Megan Racing Turbo Spec Exhaust, which offers faster response and additional horsepower, has a 4.5″ flat tip with removable double-layer silencer.

Megan Racing OE-RS Type Exhaust

Having the looks of a factory style exhaust, the Megan Racing OE-RS Type Exhaust has quiet sound, bigger pipes and polished mufflers. Mandrel bent pipes with 3’’ piping have polished finish because it is made of stainless steel. Its noise is controlled, when you improve the horsepower.

Megan Racing NA Type Exhaust

One of the main products from Megan Racing, Megan Racing NA Type Exhaust is made by 100% stainless steel to ensure additional durability, while its smooth bends and straight-through designs are any motorists’ delight. 4.5’’ tip with removable double-layer silencer, 2.5’’ inlet, strong and noticeable sounds are the main features of the Megan Racing NA Type Exhaust system.

Borla exhaust systems are among the best options, but many people are left out in the cold by them because of a smaller selection. If your car matches a Borla exhaust system you should definitely look into upgrading.

When it comes to high performance exhaust systems it does not get much better than Dynomax. They have a large selection, and have been supplying quality exhaust systems for quite some time.

If quiet is on your mind, look into Corsa exhaust systems. They offer a high level of performance, with a quieter system than the rest.

And finally, if you have a general motors vehicle SLP exhaust systems are the way to go. They specialize in firebirds and camaros, but all GM’s are welcome!